KBVF Hybrid Drive For a Chiropractic Table
Customer: Chiropractic Table Manufacturer
Application: Chiropractic Table
Drive: KBVF-13 Hybrid Drive
Ratings: 115 Vac input, 230 VAC, 3 phase output to motor. (up to 2.4 Amps)
Horsepower: ½ HP
Drive Review: The industry standard for consumer products
Chiropractic care is a form of alternative medicine concerned with mechanical disorders of the musculoskeletal system. This particular manufacturer wanted a table that would let the caregiver raise and lower the leg of a patient to exercise it after an injury. Typically the injury was severe enough that the patient could not move their leg without aid.
At the beginning and the end of the session, the design engineer wanted the leg support to stop at a horizonal position so the patient could easily get on and off the table. They also wanted the ability to disable this feature if the caregiver wanted to stop the leg at a particular non-horizontal position. This manufacturer also wanted a timing function, and the ability to control the speed of this treatment based on the size and comfort of the patient.
To facilitate this, KB offered the KBVF-13 Hybrid Drive. It let the manufacturer use a rugged, efficient 3 phase, 230 Vac induction motor and they power it with a normal 115 Vac plug. This eliminated the need to hire an electrician to provide a special outlet.
This microprocessor based control became the heart of the system.
KB allowed for speed control with a simple potentiometer. The manufacturer used a reed switch to provide an input to indicate the horizontal position. Another input was used to enable or disable the home position feature. A final input was used to select duration of the treatment.
The KB design team modified the standard software to provide a pre-programmed “Out of the Box” solution that was easily imbedded into their design.
Their table enclosure provided finger safety to eliminate unnecessary costs. They asked, KB listened and brought a unique design to life.
KBVF Hybrid Drive is the solution to provide variable speed control with unique features
commonly required to differentiate consumer products.
The KBVF Hybrid Drive has:
Producing a reliable product tailored to the patients comfort.
KBVF Hybrid Drive from KB Electronics
The industry standard for consumer products everywhere!
And since they are inside the machine, you’d probably never know!
The KBVF drive has the ability to operate a 230 VAC motor from either 115 or 230 VAC single phase supplies, and can also be ordered to operate on GFCI circuits.
The economical design lets the customer imbed our product into their system and adapt it uniquely to a particular environment.
The KBVF Hybrid Drive offers all the technology of a digital drive
with the simplicity of an analog drive –
The Best of Both Worlds!
Founded in 1967, KB Electronics, Inc. prides itself in producing, stocking and distributing (to a network of over 800 locations in over 30 countries) over 200 models of off the shelf and customizable motor drive controls that are easy to operate, cost effective, and offer the exact control for the application.
To find out more about how KB Electronics range of AC Hybrid Drives and other drives that may assist in your application, please visit www.kbelectronics.com
KB Electronics, Inc.
A Complete Line of AC & DC Drives, Automation Controls & Fan Speed Controls
12095 NW 39th Street Coral Springs, FL USA 33065 Tel: (+1) 954.346.4900 Fax: (+1) 954.346.3377
Outside Florida Call Toll Free 800.221.6570