 |
Case Study 278 - Treadmill Speed Control for an AC Induction Motor |
| |
The customer wanted their high-performance commercial treadmills to utilize the best motor technology.
Click here to read KB's solution |
|
Case Study 292 - Integrated Treadmill Controller |
| |
The customer wanted to integrate all of the required power circuits in a treadmill for low cost and ease of manufacturing, set up, and troubleshooting. Click here to read KB's solution |
|
Case Study 332 - Automatic Chip Conveyor |
| |
The customer wanted to automatically remove scrap from the cutting operation without operator intervention. Click here to read KB's solution |
|
Case Study 334 - Air Filter Life Extender |
| |
The customer wanted to extend the air filter life on their environmental hood enclosures for working with hazardous materials. Click here to read KB's solution |
|
Case Study 338 - Automatic Door Opener |
| |
The customer wanted a simplified, low-cost Variable Frequency Drive for his semi-automatic door openers. Click here to read KB's solution |
|
Case Study 366 - Drywall texture spray applicator |
| |
The customer wanted to improve his present drywall texture applicator to one that would maintain commercial robustness while pumping a wide variety of different slurries. Click here to read KB's solution |
|
Case Study 412 - Chairlift Motion Controller |
| |
The customer wanted their chairlift's logic, interface, and DC motor speed controller integrated into a low-cost, customized controller. Click here to read KB's solution |
|
Case Study 422 - Stretch Wrapper |
| |
The customer wanted the material on a stretch-wrap machine to be easily prestretched to recipes. Click here to read KB's solution |
|
Case Study 423 - Stretch Wrap Precision Tension Controller |
| |
The customer wanted an integrated amplifier, power supply and PID speed control for precision tensioning of their stretch-wrap controller. Click here to read KB's solution |
|
Case Study 427 - Precision Lens Grinder |
| |
The customer wanted to improve the efficiency of fabricating optical lenses. Click here to read KB's solution |
|
Case Study 432 - Low-cost servo position cycler |
| |
The customer wanted to replace an expensive BLDC servo in a cycling positioner application with a Variable Frequency Drive (VFD). Click here to read KB's solution |
|
Case Study 472 - Custom Serial Communications |
| |
The customer wanted a Variable Frequency Drive (VFD) that would run using their proprietary serial communications and supplied in the United States. Click here to read about KB's solution |
