KB ELECTRONICS, INC.
12095 NW 39th Street, Coral Springs, Florida 33065 USA
(954) 346-4900 FAX (954) 346-3377
"The Right Control
for your Application"
  

 
Fuses & Plug-in Horsepower Resistor
Cross Reference Chart by AC & DC Speed Control Model

KB Models
Line Fuse
Armature or Motor Fuse
Plug-in Horsepower Resistor®
KBIC All Models
Optional
Optional
Required
KBMM All Models
Available
Available
Required
KBWD All Models
External
External
Required
KBWS All Models
Optional
Optional
Required
KBCC Non -R Models
Included
Available
Required
KBCC-255
External
Included
Not Required*
KBCC-240D
External
Included
Not Required
KBWT All Models
External
Available
Not Required*
KBCC -R Models
Included
Available
Required
KBPB All Models
Included
Available
Required
KBMG-212D
External
External
Not Required
KBRG-240D-225D
Included
Included
Not Required
KBRG-255
External
External
Not Required
KBWM All Models
Included
Available
Required
KBMD All Models
Included
Available
Required
KBPC-240D
External
Included
Not Required
KBPC-225
External
External
Not Required
KBPW-240D
External
External
Not Required
KBRC-240D
External
External
Not Required
KBVF All Models
External
Not Required**
Not Required
KBAC All Models
External
Not Required**
Not Required
 

- Optional: Optional fuse mounting kit can be added.
- Available: Provisions for mounting the fuse are provided, but the fuse is not included with the control. Consult the Fuse Selection Chart for proper fuse sizing.
- Included: Fuse is included with the control. The armature fuse may have to be changed if the control is to be used with a smaller motor. Consult the Fuse Selection Chart for proper fuse sizing.
- External: There are no provisions for mounting the fuse on the control. However, we recommend that the customer provide an external means of fusing the control. Consult the Fuse Selection Chart for proper fuse sizing.
- Required: The control must have a Plug-in Horsepower Resistor® installed, correctly sized by motor horsepower. Consult the Plug-in Horsepower Resistor® Selection Chart for proper sizing.
- Not Required: This control uses Quick Jumps instead for current selection. *These models have fixed current selection, and use the CL trimpot for current adjustment. **These models have I2t Electronic Overload Protection, so do not need fusing in the motor leads.