KB
ELECTRONICS, INC.
12095 NW 39th Street
Coral
Springs, Florida 33065 USA
(954) 346-4900 FAX (954) 346-3377
"The Right
Control
for your Application"
for your Application"
|
KB
ELECTRONICS, INC. |
"The Right
Control for your Application" |
|
SUBJECT: Warning:
Do not connect the KBSI-240D Signal Isolator with multiple KBVF, KBRG,
KBMG, KBWD OR KBWT AC or DC DRIVES
Please note, if your application requires using multiples of the following AC or DC Drives, KBVF, KBRG, KBMG, KBWD or KBWT, then each drive must have its own signal isolator. All KB motor speed controls require the use of a signal isolator when being controlled by an external grounded signal. The KBSI-240D signal isolator can be used successfully with any single control. It will provide isolation between the grounded input signal and the AC or DC motor speed control. The KBSI-240D signal isolator can be used with multiple, non-regenerative, DC Drives such as KBIC, KBMM, KBMD and KBPC. If you have an application that requires multiple PWM or regenerative speed controls to all follow one input signal, you must use one signal isolator per control. Please call your Applications Engineer or Regional Manager if you have any questions or need applications assistance. Sincerely, Richard
Fritts National Sales Manager |